RojasMaggard209

Материал из IrkutskWiki
Перейти к: навигация, поиск
A liquid flowmetersis a device for measuring, monitoring, or recording the rate of flow, pressure, or discharge of a liquid, as of a gas.

An Ultrasonic Flowmeter is actually a type of flow meter that measures the flow of a liquid, gas or steam by using the principle of ultrasound. The flow meter can measure the typical velocity along the path of an emitted beam of ultrasound, by averaging the difference in measured transit time between the pulses of ultrasound propagating into and against the direction with the flow. Ultrasonic Flowmeters are affected by the pressure, temperature, density and viscosity on the flowing medium.

You will find three unique forms of Ultrasonic flow meters.

  1. Transmission flowmeters, which may be distinguished into In-line flowmeters and Non-Intrusive flowmeters.
  2. Reflection or Doppler flow meters.
  three. Open-Channel flowmeter.

Ultrasonic Flowmeters such as In-line Flowmeters are Multivariable Flowmeters as it is used for the measurement of liquid, gas or steam in industrial applications for the water and wastewater treatment plant, chemical and petrochemical, oil and gas, energy, pharmaceutical, paper, food and beverage industries.

Multivariable In-line Flowmeters, are used for Volumetric or mass flow monitoring of most liquids, gases or steam. Multivariable In-line Vortex flowmeters utilizes 3 main sensing elements, a vortex shedding velocity sensor, a temperature sensor, plus a pressure sensor to measure the mass flow rate of liquids, gases or steam.

In-line Vortex flowmeters operates in a following manner:

   * It measure flow of liquids, gas and steam by detecting the frequency at which vortices are alternatively shed from a bluff physique.
   * As flow passes a bluff physique in the flow stream, vortex meter, the vortices generate low and high pressure zones behind the bluff body, or shedder bar.
   * In-line liquid flowmeters makes use of a piezoelectric crystal sensor to detect the pressure exerted by the vortices on the velocity sensor.
   * The piezoelectric crystal converts these "pulses" into electrical signals. The meter uses a sensor created to make a robust sensor and to decrease prospective leaks.

In-line Flowmeters are classified in to the following models:

  1. Pro-V? Model M22-VTP
  2. Pro-V? Model M22-VT
  3. Pro-V? Model M22-V
  four. Pro-V? Model M22-EM
  5. Pro-V Model M22-R

The Model M22-VTP delivers you flow pc functionality within a compact field device.

The Model M22-VT integrates a precision 1000 Ohm platinum RTD temperature sensor that can be utilised to calculate and output compressed mass reading.

The Model M22-V delivers direct reading of volumetric flow rate-generally probably the most cost-effective solution for liquid flow monitoring-in applications ranging from common water flows to hydrocarbon fuel in flow measurement.

The Model M22 Energy Monitoring alternative permits real-time calculations of power consumption for a facility or course of action. The meter is often programmed to measure steam, hot water or chilled water.

The Model M22-Redundant flowmeter presents dual flowmeters within the identical pipe spool for crucial flow applications or where a backup process is essential.

VorTek Instruments LLC. manufactures precision multivariable gas mass flow meters for instance In-line Flowmeters and Insertion Flowmeters for the measurement of liquid, gas, and steam in commercial, industrial applications.